Quick Contact

How to measure for roller blinds?

We advise that when you are taking measurements, that you use a metal tape measure for accuracy. Measurements should be in either cm or mm. We also high recommend that you double-check your measurements before submitting them, for accuracy.



Note: there is a gap of about 1.5cm from the edge of the fabric to the ends of the roller mechanism, on either side. If you are unsure as to what to do still, please call us for advice on 1300 369 923.

There are 3 ways in which to measure for your blinds:

Inside Recess
Make sure that the recess is at least 6cm deep. Otherwise the blind will protrude beyond the recess.
 

1. You need to measure width across from A to B. 
We need this measurement in full; do not reduce it.

There will be a gap of about 1.5cm between the fabric and the recess wall which will allow some light through, even with a blackout lining.

2. Measure drop from C to D.

We also need this measurement in full.

3. Note which side you would like the chain – right or left.

Outside Recess

Decide on the amount of fabric to overlap the top and sides of the window recess. We recommend at least 5cm for the top and 6.5cm for the sides to minimise light leakage when using a blackout lining.

Measure the outside edge of architrave, by:

1. Measure the width from A to B
2. Measure the drop from C to D
3. Note which side you would like the chain – right or left


 

Fixed to Window Architrave (Frame)

First, decide whether you want your roller blind to hang on the outside or inside of the window architrave. 

Measure the inside edge of architrave:

1. Measure the width from A to B
2. Measure the drop from C to D
3. Decide which side you would like the chain – right or left

How to measure for vertical blinds?

1. Choose Mount Type

Inside Mount

Window treatments are most commonly installed on the inside of the window frame.

Outside Mount

Occassionally you will need to mount your window treatments outside the window frame. These treatments are mounted directly to the trim or above the windows.

2. Measure

Inside Mount

Measure the inside of the window frame in 3 places for width and height. Record the narrowest width and shortest height

Outside Mount

Measure the overall area to be covered. 
Add extra inches (approximately 3”) to the width and height of the window opening for optimum light control and privacy.

Record Measurements

Keep track of your measurements for when you order your window treatments: